The 14 gallon FastFerment Conical is here!
The FastFerment System is a one-stage fermenter, which allows brewers and winemakers to do primary and secondary fermentation in the same unit.
Easy & Efficient
The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods & with less equipment, clean up is easy.
Benefits Over Traditional Conicals
The downfall of other conical fermenters is that you have to ferment the product with the valve closed and then the trub & sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the sediment out the bottom. This results in two main issues:
- You need to time the flushing of the sediment perfectly to ensure minimal loss of product.
- As the sediment is flushed out, there will always be yeast and trub/sediment hazes that float up back up into your beer or wine.
Highlight Reel - Bigger is Better!
- Most Affordable 14G Conical Available
- Built on the Gold Medal winning design of the 7.9G FastFerment
- Heavy Duty
Save $100s & harvest your yeast strains with the Collection Ball
Spigot & Thermometer for 7.9G work for the 14G as well
- +33% Thicker vessel & collection ball than the 7.9G FastFerment
- +33% Thicker stand than the 7.9G FastFerment
- +33% Larger valve than the 7.9G FastFerment
- 14 US Gallon / 53 Litre Conical Fermenter
- Large Screw Top Lid with Hollow Silicon Gasket
- Rubber Grommet & 3-Piece Plastic Airlock
- Bottom Collection Ball for Harvesting Yeast
- Teflon Seated Union Valve with Fittings
- Solid Tubular Steel Stand with Assembly Screws
- PVC Hose & Hose Clamp
- Stainless Steel Thermowell
- Permanent Stainless Steel
- Teflon Tape
- Step by Step Instructions & Best Practices Manual
- Conical Body & Collection Ball
1.5" 3.8 cm Teflon Seated Valve
- +33% Thicker than the 7.9G FastFerment
- Food Grade HDPE
- Collection Ball Volume - 40.6 oz / 1200ml
- +33% Larger than the 7.9G FastFerment
- All BPA Free Plastics
- To top of airlock: 41.7" / 105.9 cm
- To top of Lid: 38.2" / 97 cm
6" / 15.2 cm Screw Top Lid with Hollow Rubber Gaskets
- Conical Body: 18.6" / 47.2 cm
- Stand Rings: 18" / 45.7 cm
14 US Gallons / 53 Litres
- This is the same lid as the 7.9G FastFerment and our newest rubber hollow gasket that creates the perfect seal every time
1.5" / 3.8 cm Teflon Seated Union Valve with Fittings
47” / 12 mm diameter legs & .55” / 14 mm diameter rings
- Total capacity including the Collection Ball
Exterior Volume Markings on Vessel and the Collection Ball
½” diameter hose for fast keg filling
- +33% thicker than the 7.9G FastFerment Stand
- Stand Weights: 12.5 lbs 14G Stand / 7.4 lbs Stand Leg Extension Kit